I have a box of these left over form another job. The customer will be changing to a USB charging port on the newer lights. I myself would prefer less thru holes for an outdoor flashlight and prefer carrying a few rechargeable batteries instead. This is an aluminum machined 130 lumen flashlight. It has a high or low beam and strobe as well. It can use 3 different batteries and 2 sizes as the barrel is sizable. Shock and water resistant anodized inside and out for corrosion resistance. I have around 100 left over on a job.So you just get the flashlight in a bubble wrap as these are OEM parts for a larger job. This light does not have batteries. Here are some specs and simple instructions:
Operates by a pushbutton on the bottom of the light for 1 handed operation. Lightly pushing the button again will cycle into low beam and again to strobe. Light defaults on in high beam
Works with the following Batteries: AA 1.5V or. AA1.2v Rechargeable Battery or. CR123A 3v Lithium Battery
A heavy metal clip allows the light to be securly attached and or used with a lanyard.
Will run about 130 minutes with a CR123A Lithium or 40 minutes with a AA Battery. Bulb is rated for 50,000 hours
Quantity:
© 2024 Jandd Mountaineering, Inc.
