Click Images Below to View Larger
Extreme Front Rack Tall Boy - Demos & Blems
The Expedition Rack Tall Boy was developed to fit the larger wheel and tire combinations that are available. The Jandd Extreme Front Rack is the only equipment to reach for when front panniers are a necessity. The 3/8" 6061 aluminum rod stock is double-welded for strength in the most adverse conditions, and the generous 6"-wide top plate ensures sufficient space for a Jandd Rac Pac or a compact sleeping bag. On the Extreme Front Rack panniers can be mounted low for stability or high if added clearance is desirable. Mounting is quick and easy due to innovative reverse inverted bottom armatures that allow the rack to fit onto almost any fork configuration with minimal adjustment. Two sets of mounting slots, one near the top and one midway up from the fork, allow for solid attachment using clamps (included) or at fixed eyelet points on the fork. All stress points are double-welded.
2014 racks have new lower hook slot.
Mounting Instructions for Front Rack
Weight: 37 oz/1054.5 g
Length: 13.50 in/34 cm
Height: (Overall) 16.75 in/42.5 cm
Height: Pannier Mounting 12 in/30.5 cm
Width: 6 in/15.25 cm
WEIGHT CAPACITY 40 LBS
FAQ: Will the rack fit my front fork attachment points?
The distance between the bottom attachment hole and the slot is about 5.75” to11.00”. So take a ruler and measure that distance as long as you fall in between you should fit. If you are slightly outside of this measurement the bottom attachment leg can be bent a bit to allow another .25 to .5 inches. Also, clamps can be used to make the rack fit. Check out the measurements on the original
Extreme Front Rack
as it might be tall enough.
Sale Price: $79.95
FANNY PACKS & HYDRATION SYSTEMS
BACKPACKING & ACCESSORIES
BOOK PACKS SHOULDER PACKS
TRAVEL PACKS LUGGAGE & ACCESSORIES
POLICE & FIREFIGHTER
© 2019 Jandd Mountaineering, Inc.